Molded Rubber Screen Panels

Corrosion Engineering, Inc. provides its products through a network of distributors throughout the United States and Canada. We also service our local and international customers directly. For the name of the distributor in your area, please contact us at one of the numbers listed below.
Phone: Toll free: Fax:	(480) 890-0203 (888) 501-2047 (480) 890-0589
info@corroeng.com
Corrosion Engineering Inc. PO Box 5670 Mesa, Arizona 85211-5670

Non-blinding screen panels

In 1980, Corrosion Engineering conducted research and development into the possible introduction of molybdenum disulfide (MOS2) into rubber compounds to reduce the friction between material and screen panels or wear liners and reduce the build-up and blinding.

Upon completion of our R&D it was clearly evident that our natural rubber compounds with MOS2 added had the following benefits compared to the same compound without MOS2:

Dramatic reduction of the co-efficient of friction
Significant increase in the flex life of rubber by approximately 200%
Tensile strength increased 15%
Increase in elongation percentages of 13%

We now have screen panels with MOS2 added to the rubber compounds operating in applications where the moisture content is high and blinding has been of major concern in the past. Once installed, blinding is eliminated and screening efficiency vastly improved.

Corrosion Engineering Screen Panels - Tougher Than Steel!

Rubber screens have for years proven to be very effective in combating wear. Generally our rubber screens out wear wire cloth 15 times longer. In addition to the superior wear-life, rubber screens substantially reduce noise levels. Compared to perforated steel plate, noise level reductions of up to 500% are common.

New technology developed by Corrosion Engineering now adds a totally new dimension to rubber screens, offering in addition to superior wear-life and effective noise reduction, dramatically improved screening efficiencies. Production levels are now on a par with or exceed previous levels of production obtained by the conventional woven wire or perforated steel plate.

Because of the varied conditions that exist in screening operations today we have developed four different reinforced constructions of rubber screens which freely allows us the opportunity to custom design the product to meet the overall needs of the application.

Regardless of the type of screen, two factors remain constant: fully molded and molded tapered openings. With this method of design we can offer screens manufactured with thick rubber, without sacrifice to screening efficiency.

Corro-cable panels A standard in the industry, Corro-cable panels are molded in tension with high strength steel cables. Flex-gap construction provides flexibility with strength. Molded tapered openings prevent plugging common in punched panels.	Modular Screen Panels Easy to install, Corrosion Engineering's modular screen panels give superior impact performance vs. urethane panels. Available in many panel sizes, to fit most systems.
Corro-flex panels Offer the flexibility of a Corro-cable screen on flat, bolt-down decks. Our custom manufacturing process allows for unique characteristics of the application to be accounted for in the design.	Corro-steel panels Custom designed for applications with severe impact, extreme loading conditions or inadequate support for cable screen panels. Users experience a dramatic noise reduction over standard steel screens.
Integrally Molded Skid Bars Improve material stratification and increase screening efficiency with our molded skid bars. Our unique customized design maximizes wear life and produces high screening efficiency with minimal plugging.	Molded Rubber Grizzly Bars Custom designed to fit existing supports, our durable grizzly bars have a double tapered design that reduces plugging and increases production.

For More Information, Please Contact Corrosion Engineering Today!

*Phone: (480) 890-0203*	*Toll free: (888) 501-2047*	*Fax: (480) 890-0589*	*Email: info@corroeng.com*
*Corrosion Engineering Inc., PO Box 5670, Mesa, Arizona 85211-5670*

Site Design by Sovereign Studio
This site is best viewed at 800x600 or higher.
All contents Copyright 2005 Corrosion Engineering Inc.